Help me optimize the indicator's ATR multiplier settings for that specific timeframe

 To optimize the Supply and Demand Zones [BigBeluga] indicator, you must adjust the ATR (Average True Range) Period and Multiplier settings. These inputs control how wide the zones are and how large a price imbalance must be to form a new box. [1]

Because you are trading large-cap stocks like ORCL and T right before the 1 PM PST close, volatility behaves differently on the 1-minute versus the 5-minute timeframe.

1. Optimization for the 1-Minute Timeframe (Micro Scalping)

The 1-minute chart experiences heavy market noise and rapid, algorithmic micro-swings. Standard settings will create too many small, weak boxes that break instantly. [1]

• ATR Period: Set to 14 or 20. A higher period smooths out the noise from solitary, erratic 1-minute candles.
• ATR Multiplier: Set to 1.5 to 1.8 (Default is usually 1.0 or 2.0).
• The Logic: Lowering the multiplier slightly on the 1-minute chart ensures the indicator captures the tighter, fast-moving structural shifts typical of high-volume large-caps. It prevents the demand boxes from being too wide, giving you a tight, well-defined risk-to-reward ratio. [1]

2. Optimization for the 5-Minute Timeframe (Core Trend)

The 5-minute chart provides a much cleaner structural outlook for afternoon setups. It filters out false breakouts but requires a larger move to confirm institutional presence. [1, 2]

• ATR Period: Set to 10 or 14.
• ATR Multiplier: Set to 2.2 to 2.5.
• The Logic: Increasing the multiplier on the 5-minute chart ensures that a demand box only forms during a massive, undeniable institutional push. This prevents the indicator from painting boxes during low-volume, late-morning chop, leaving only high-probability zones for your pre-market close decisions. [1]

3. How to Update Settings in TradingView

1. Hover over the Supply and Demand Zones [BigBeluga] text in the top-left corner of your chart.
2. Click the Settings (Gear Icon).
3. Under the Inputs tab, locate the ATR Settings or Zone Size Settings.
4. Input your values based on the timeframes above and click OK.
5. Save this specific chart configuration to your 5-chart layout templates. [1]

4. Golden Rule for the 1 PM PST Close

When optimizing these settings, remember that zone width equals your risk. If a 5-minute demand box forms with a 2.5 Multiplier, the box will be vertically wide. Your stop-loss must go just below the bottom of that box. If the box is too wide for your risk tolerance, drop down to your optimized 1-minute layout to find a tighter, nested entry within that larger zone.

Quick questions if you have time: